Maximize productivity

65.3 the pressure swing control valve sets a new standard for downstream pressure control and isolation. This series of pressure swing control valves are specially designed for semiconductor and display production systems, which can provide the highest level of controllability in a wide range of conductance. 65.3 the pressure swing control valve is equipped with a motor with integrated position control, which can provide improved functions.

The driver controller has higher 32-bit data processing capability, which can provide new controllability. This means that each position of the pendulum valve plate can be controlled very quickly, precisely and accurately, so as to achieve very accurate downstream pressure control in a very short response time. The preset motion sequence of the valve can adjust the speed and route according to various constantly changing process parameters. 65.3 the pressure swing valve can also prevent the release of particles. The optimized damping closing motion of the valve plate can avoid the impact and vibration common to traditional valves. 65.3 the closing of the pressure swing control valve is smooth, and the closing and opening are almost imperceptible. The valve plate provides very precise mechanical guidance, ensuring contactless air flow control in reciprocating motion and achieving uniform sealing in all areas of sealing movement.

65.3 the pressure swing control valve has been installed in hundreds of demanding applications under various process conditions, proving its excellent reliability and performance. 65.3 the pressure control swing valve is also an ideal choice for reforming the existing system.


Closed
control position
Open
Optically closed
Leak-tight closed

65.3 the size of the pressure swing valve is DN 100-350 mm (4 "- 14"), made of aluminum or hard anodized aluminum, with iso-f and JIS standard flange connections. Custom flanges can be integrated or as a direct mount option. The standard sealing material is fluororubber, and other materials can be used as required.

The controller can adopt special control algorithm (adaptive, fixed PID, upstream, soft extraction). Various standard ports on the controller can be easily accessed through a personal computer or connected to a process control unit (PCU). The dedicated control performance analyzer (CPA) software can easily calibrate the 65.3 pressure swing valve and simplify the maintenance plan


The Key Features of 65.3 HV Pendulum Control Valve

Features:

  • Fast and precise holding pressure control
  • Shock-free operation: No particle activation
  • Increased process stability: All flows and pressures are controlled
  • Integrated 32-bit pressure regulator (IC2) with Control Performance Analyzer (CPA)
  • "Plug and play" retrofit: No undocking or alignment required

Benefits:

  • Outstanding reliability, precision and speed
  • Extended maintenance cycle
  • Low operating costs
Technical data
Sizes   DN 100 (4"), DN 160 (6"), DN 200 (8"),
DN 250 (10"), DN 320 (12"), DN 350 (14")
Actuator   Stepper motor with integrated pressure controller
Body Material   Aluminum blank or hard anodized
Feedthrough Actuator
Sealing Ring
Rotary Feedthrough
Shaft Feedthrough
Standard Flanges   ISO-F, JIS
Leak Rate Valve Body Blank aluminium
Hard anodized aluminium
< 1 × 10-9 mbar ls-1
< 1 × 10-5 mbar ls-1
Leak Rate Valve Seat Blank aluminium
Hard anodized aluminium
< 1 × 10-9 mbar ls-1
< 1 × 10-4 mbar ls-1
Pressure Range Blank aluminium
Hard anodized aluminium
1 × 10-8 mbar to 1.2 bar (abs)
1 × 10-6 mbar to 1.2 bar (abs)
Cycles until first Service Pressure Control
Closing / Opening
1 Million
200 000
Temperature Valve Body ≤ 120 °C 
  Controller max. 50 °C (≤ 35 °C recommended)
Material Valve Body, Plate EN AW-6061 (3.3211)
  Sealing Ring EN AW-6061 (3.3211), AISI 305 (1.4303),
AISI 420C (1.3541), AISI 631 (1.4568)
  Other Parts AISI 316L (1.4404, 1.4435), AISI 440 (1.4122),
AISI 301 (1.4310), AISI 316 Ti (1.4571), AISI 304 (1.4301)
Seal Bonnet, Plate Body Feedthrough FKM (Fluoroelastomer)
Mounting Position   Any

 

Valve with integrated pressure controller and stepper motor DN 40 - 50 (11/2” - 2”) ISO-KF

Valve with integrated pressure controller and stepper motor DN 40 - 50 (11/2” - 2”) ISO-KF

DN 63 / 2,5
mm / inch
63 / 2,5
mm / inch
63 / 2,5
mm / inch
A 45 / 1.77 61 / 2.40 16 / 0.63
A 45 / 1.77 61 / 2.40 16 / 0.63
A 45 / 1.77 61 / 2.40 16 / 0.63

Valve with integrated pressure controller and stepper motor DN 40 - 50 (11/2” - 2”) ISO-KF

Valve with integrated pressure controller and stepper motor DN 40 - 50 (11/2” - 2”) ISO-KF

Valve with integrated pressure controller and stepper motor DN 40 - 50 (11/2” - 2”) ISO-KF

DN 63 / 2,5
mm / inch
63 / 2,5
mm / inch
63 / 2,5
mm / inch
A 45 / 1.77 61 / 2.40 16 / 0.63
A 45 / 1.77 61 / 2.40 16 / 0.63
A 45 / 1.77 61 / 2.40 16 / 0.63
Specify standard product

Get to the product details to specify your requirements to get a quote or to get a specific CAD data download.

Customized Solution

Specify your customized solution.

If you have your specification already at hand, please upload it and submit it to us. We are happy to send you a quote.