Reliable Isolation Under All Conditions

The 25.0 HV Cylinder Valve series is designed to be used in harsh process environments with corrosive and particle carrying gasses, such as sub-fab processes. The series is available in angle (25.0), inline (25.1) and 3/2 way design (25.2) and is laid out in each version for maximum conductance.

To provide durability and high uptime the 25.0 HV Cylinder Valve series has a seal protection system that combines the benefits of the high conductance of a cylinder design with an increased seal lifetime. The seal protection system works with a TILT-TURN-TILT movement of the cylinder in which the cylinder removes the gate seal from the valve seat in a lift movement, avoiding any friction and with it higher seal wear and particle generation. When at full opening (after a 90° turn), the TILT-TURN-TILT movement will also press the seal gently to the valve body to protect the seal also from potential abrasive particles in the gas stream. If there is power failure, the valve mechanism is locked in its open or closed position, maintaining the last valve position.

Already installed in thousands of demanding applications under various process conditions, the 25.0 HV Cylinder Valve series has proven its outstanding reliability.

VAT 25.0 HV Cylinder Valve (Angle Version)

VAT 25.0 HV Cylinder Valve (Angle Version) - TILT movement of gate. Gate seal lifts off from valve seat.
1. TILT movement of gate. Gate seal lifts off from valve seat.
VAT 25.0 HV Cylinder Valve (Angle Version) - 90° TURN of gate towards the open position.
2. 90° TURN of gate towards the open position.
VAT 25.0 HV Cylinder Valve (Angle Version) - TILT movement of gate towards the valve body. Gate seal is protected.
3. TILT movement of gate towards the valve body. Gate seal is protected.

25.0 HV Cylinder Valves are available as a pneumatic version with a solenoid valve as an accessory for external mounting. The valve position is indicated by an LED (10 – 30 VDC, 5 – 100 mA).

Standard options for flange connectors are ISO-KF and ISO-KF “claw”. The standard gate sealing is FKM. Customer-specific flanges can be integrated, as can special features, e.g., heating cartridges, other sealing material or a stainless steel version.


Key features of the 25.0 HV Cylinder Valve

Features:

  • Reliable, proven design for harsh environments
  • TILT-TURN-TILT mechanism to protect seal
  • Maximum conductance

Benefits:

  • Reliable performance
  • Low and easy maintenance
  • Low cost of ownership
Technical data
Sizes   DN 16 (⅝"), DN 25 (1"), DN 40 (1½")
Actuator Pneumatic Double acting
Body Material   Aluminum
Standard Flanges   ISO-KF, ISO-KF "claw"
Leak Rate Valve Body, Valve Seat < 1 × 10-9 mbar ls-1
Pressure Range   1 × 10-8 mbar to 3 bar (abs)
Differential Pressure on the Gate in Closing Direction
in Opening Direction
≤ 1.2 bar
≤ 3.0 bar
Differential Pressure at Opening   ≤ 1.2 bar
Cycles until first Service   100 000
Temperature Valve Body
Actuator
Position Indicator
≤ 120 °C
≤ 120 °C
≤ 80 °C
Material Valve Body EN AW-6060 (3.3206), EN AW-6082 (3.2315)
  Gate, Bonnet Flange EN AW-6082 (3.2315)
  Shaft AISI 316L (1.4435) with Ni-PTFE coating
  Gate Fastening Screw, Washer A4-80 with Ni-PTFE coating
Seal Bonnet, Gate, Feedthrough FKM (Viton®)
Feedthrough   Rotary Feedthrough
Mounting Position   Any
Position Indicator: Contact Rating Voltage
Current
10 – 30 VDC
5 – 100 mA
Valve Position Indication   LED

 

Scroll to:
Scroll to:
Specify standard product

Get to the product details to specify your requirements to get a quote or to get a specific CAD data download.

Customized Solution

Specify your customized solution.

If you have your specification already at hand, please upload it and submit it to us. We are happy to send you a quote.