Solar Thin Film Deposition
Solar panel manufacturers use a variety of coating processes (CVD, ALD, MBE, PVD, etc.) to produce the ultra-thin films that make up the performance o...
Read moreThe main requirement of a valve with soft-pump function is to avoid turbulence during valve opening as this could negatively affect the process, e.g. through particle activation. In addition, rapid pressure changes as a result of high differential pressure during valve opening could cause sudden condensation effects, which could also adversely affect process parameters. The 29.0 HV Angle Valve with Soft-Pump Function avoids this.
The soft-pump function of the 29.0 is provided by an adjustable orifice in the closing plate. The adjustment wheel in the valve cover allows fine tuning of the soft pump effect. This ensures optimum calibration to the desired process parameters.
To enable simple and precise adjustment as well as easy resetting, the wheel is provided with 11 position markings. These facilitate the reproducibility of a setting as well as copying the setting to other valves that are to operate with the same setting.
The series is available also as inline valve version (29.1).
Tested in thousands of demanding applications under various process conditions, the 29.0 series has proven its outstanding “soft” acting performance.
A positive side effect of the soft-pump function is that any pulse sound is reduced or avoided. This results in a quieter production/operation environment.
The 29.0 HV Angle Valve with Soft-Pump Function is based on a robust and reliable core design. The pneumatic actuator is single-acting, meaning that a closing spring closes the valve when pneumatic pressure is not applied. The series is available in sizes DN 25 – 80mm (1"- 3") either in aluminum or stainless steel.
Standard options for flange connections are ISO-KF and ISO-K, but customized flanges can also be integrated. An optical position indicator and an electrical position output signal are standard.
Sizes |
DN 25 (1’’) DN 40 (1½’’), |
|||
---|---|---|---|---|
Actuator | Pneumatic | Single acting with closing spring (NC) | ||
Body Material | Aluminum or Stainless Steel | |||
Feedthrough | Bellows | |||
Standard Flanges | ISO-KF, ISO-K | |||
Leak Rate | Valve Body | < 1 × 10-9 mbar ls-1 | ||
Valve Seat | < 1 × 10-9 mbar ls-1 | |||
Pressure Range | DN 25 – 50 DN 63 – 80 |
1 × 10-8 mbar to 1.2 bar (abs) 1 × 10-8 mbar to 4 bar (abs) |
||
Differential Pressure on the Plate | In Opening Direction | ≤ 1.2 bar | ||
In Closing Direction | DN 25 – 50 DN 63 – 80 |
≤ 1.2 bar ≤ 4.0 bar |
||
Differential Pressure at Opening | ≤ 1 bar | |||
Temperature | Valve Body | ≤ 150 °C | ||
Actuator | DN 25 – 50 DN 63 – 80 |
≤ 120 °C ≤ 80 °C |
||
Solenoid Valve | ≤ 80 °C | |||
Position Indicator | ≤ 80 °C | |||
Material | Main Valve Body: Aluminum | DN 25 – 63 DN 80 |
EN AW-6060 (3.3206), EN AW-6061 (3.3211), EN AW-6063 (3.3206), EN AW-6082 (3.2315) EN AC-42000 |
|
Main Valve Body: Stainless Steel | AISI 304 (1.4301) , AISI 316L (1.4404) | |||
Soft-Pump Valve Body | EN AW-6060 (3.3206), EN AW-6061 (3.3211), EN AW-6063 (3.3206), EN AW-6082 (3.2315) |
|||
Plate | AISI 316L (1.4404, 1.4435) or AISI 304L (1.4306) | |||
Bellows | AISI 316L (1.4404, 1.4435), AISI 316Ti (1.4571) | |||
Seal | Bonnet, Plate | FKM (Viton®) | ||
Mounting Position | Any | |||
Solenoid Valve | 24 VDC, 2.5 W (others on request) | |||
Position Indicator: Contact Rating | Voltage | 5 – 50 VAC/DC | ||
Current | 5 – 100 mA | |||
Valve Position Indication | Visual (Mechanical) |