For Sensitive Production Processes With Large Volume Flows

The main requirement for a valve with a soft-pump function is to avoid turbulence when the valve opens, as this could have a negative impact on the production process, e.g. by the uneven distribution of reactive gases or by the swirling of particles. In addition, rapid pressure changes due to a high differential pressure when the valve opens could cause sudden condensation effects, which could also adversely affect process parameters.
The 29.2 HV angle valve with soft-pump function avoids this.

The soft-pump function of the 29.2 makes it particularly suitable for large volume flows that need to be precisely calibrated over a large possible conductance spectrum. The large conductance spectrum is achieved by combining two high vacuum angle valves, where the main valve interacts with a bypass valve in one compact assembly.

An adjustment wheel on the side of the valve allows fine-tuning of the soft-pump effect. This allows optimum calibration to the desired process parameters over a very wide conductivity spectrum.

To enable simple and precise adjustment as well as easy resetting, the wheel is provided with 11 position markings. These facilitate the reproducibility of a setting as well as copying the setting to other valves that are to operate with the same setting.

In this design, the 29.2 is outstanding for its performance spectrum in terms of precision and compact construction. What in other configurations can only be achieved with multiple valves and additional piping, the 29.2 offers in a single solution.

For temperature-sensitive processes that are prone to condensation, the 29.2 can be equipped with an integrated PTC heater.

Especially in demanding applications with large process chamber volumes under changing process conditions, such as solar cell or display manufacturing, the 29.2 series has proven its excellent "soft" operation.

A positive side effect of the dual soft-pump function is that any impulse noise is reduced or eliminated. This results in a quieter production/operating environment. 


Closed
Open

The 29.2 HV angle valve is based on a reliable and robust core construction designed for long maintenance-free operation. Should maintenance be necessary, it can be done easily and quickly.

Due to the modular design of the 29.2, different combinations of main and bypass valve are available: DN 100mm with DN 25mm bypass and DN 160mm with DN25, DN 40 or DN 63mm bypass. There are also two pneumatic actuator options: single acting with closing spring (NC) and double acting. The 29.2 is available in aluminum or stainless steel design.

Standard flange connection options include ISO-KF and ISO-K, but custom flanges can be incorporated. A visual position indicator and an electrical position output signal are standard.


Key features of the 29.2 HV Angle Valve with Soft-Pump Function

Features:

  • Soft pump function to avoid condensation and particle activation
  • Modular combination of different main and bypass valves
  • Easy reproduction of soft-start settings
  • Full functionality even at high differential pressure

Benefits:

  • Avoids turbulence or pressure pulses
  • Large conductance range with precise calibration
  • Long maintenance-free operating time
  • Quick and easy minimal maintenance

Technical data
Sizes  

DN 100 (4"), DN 160 (6")

Actuator Pneumatic Main Valve Double acting, Soft-Pump Valve Single acting with closing spring (NC)
Body Material   Aluminium or Stainless Steel
Feedthrough   Shaft Feedthrough
Standard Flanges   ISO-KF, ISO-K
Leak Rate Valve Body < 1 × 10-9 mbar ls-1
  Valve Seat < 1 × 10-9 mbar ls-1
Pressure Range   1 × 10-7 mbar to 2 bar (abs)
Differential Pressure on the Plate In Opening Direction ≤ 1.2 bar
  In Closing Direction ≤ 2.0 bar
Differential Pressure at Opening   ≤ 1 bar
Temperatur Valve Body ≤ 150 °C
  Actuator ≤ 80 °C
  Solenoid Valve ≤ 80 °C
  Position Indicator ≤ 80 °C
Material Main Valve Body: Aluminum EN AC-42000
  Main Valve Body: Stainless Steel AISI 304 (1.4301) , AISI 316L (1.4404)
  Soft-Pump Valve Body EN AW-6060 (3.3206), EN AW-6061 (3.3211),
EN AW-6063 (3.3206), EN AW-6082 (3.2315)
  Plate AISI 316L (1.4404, 1.4435) or AISI 304L (1.4306)
  Bellows AISI 316L (1.4404, 1.4435), AISI 316Ti (1.4571)
Seal Bonnet, Plate FKM (Viton®)
Mounting Position   Any
Solenoid Valve   24 VDC, 9.0 W (others on request)
Position Indicator: Contact Rating Voltage 5 – 50 VAC/DC
  Current 5 – 100 mA
Valve Position Indication   Visual (Mechanical)

 

Specify standard product

Get to the product details to specify your requirements to get a quote or to get a specific CAD data download.

Customized Solution

Specify your customized solution.

If you have your specification already at hand, please upload it and submit it to us. We are happy to send you a quote.