Reliable Isolation on a Small Footprint

The 08.2 Insertable Gate Valve series is designed to be installed directly between two connecting pipes without flanges. The advantage: It requires very little space.

The gate valve uses VAT's patented VATLOCK technology. It ensures a reliable gate sealing without any friction. In addition, the VATLOCK technology mechanically locks the gate in the closed position on both sides of the valve. This allows flexible and reliable use of the 08.2 Insertable Gate Valve in a wide variety of application situations and, in the case of pneumatic actuation, offers additional safety in the event of a compressed air supply failure.

In its modular design and its various design options, the 08.2 Insertable Gate Valve can be adapted to almost any application. 

Already installed in thousands of demanding applications, the 08.2 Insertable Gate Valve has proven its outstanding reliability under a wide range of process conditions.

08.2 FV Insertable Gate Valve

08.2 FV Insertable Gate Valve - Closed
Closed
08.2 FV Insertable Gate Valve - Open
Open

The 08.2 Insertable Gate Valve is available as manual or pneumatic version, with solenoid valve either as on board solution or for external mounting. Standard voltage of solenoid valve is 24 VDC, but other voltages are available on request. The 08.2 uses a toggle lever in the manual version and is available in DN 50.

The gate position is indicated visually (mechanically) directly on the valve by means of a position indicator and is also output as an electrical signal. Standard sealing material is FKM, other materials are available on request.


Key features of the 08.2 Insertable Gate Valve

Features:

  • Insert design
  • Reliable and robust
  • VATLOCK technology – secure locking in close position on both gate sides
  • Various actuator and solenoid valve options

Benefits:

  • Only small installation space required
  • Reliable performance
  • Extended maintenance free cycle
  • Low cost of ownership
Technical data
Sizes   DN 50 (2")
Actuator Pneumatic Double acting
  Manual With Toggle Lever
Body Material   Aluminum
Feedthrough   Shaft
Installation   DIN centering ring
Leak Rate Valve Body < 1 × 10-9 mbar ls-1
  Valve Seat < 1 × 10-9 mbar ls-1
Pressure Range   1 × 10-7 mbar to 1.6 bar (abs)
Differential Pressure On the Gate ≤ 1.0 bar
  At Opening ≤ 30 mbar
Cycles until first Service   50 000
Temperature Valve Body ≤ 120 °C
  Actuator ≤ 80 °C
  Solenoid Valve ≤ 50 °C
  Position Indicator ≤ 80 °C
Heating and Cooling Rate   ≤ 30 °C h-1
Material Valve Body EN AW-6082 (3.2315)
  Mechanism AISI 301 (1.4310)
Seal Bonnet, Gate FKM (Viton®)
Mounting Position   Any
Solenoid Valve   24 VDC, 5.4 W (others on request)
Position Indicator: Contact Rating Voltage ≤ 50 VAC/DC
  Current ≤ 0.1 A
Valve Position Indication   Visual (Mechanical)

 

Scroll to:
Scroll to:
Specify standard product

Get to the product details to specify your requirements to get a quote or to get a specific CAD data download.

Customized Solution

Specify your customized solution.

If you have your specification already at hand, please upload it and submit it to us. We are happy to send you a quote.