Variable for Any Requirement

The key performance indicators for angle valves are reliability and variability. The 24.5 FV Inline Valve series combines both. The series has been designed to allow the construction of large sizes for high and even slightly contaminated gas volume flows. Sizes of up to DN 800 mm (32") have been produced so far.

Tested in thousands of demanding applications under various process conditions the 24.5 series has proven its outstanding reliability. With its various design options in actuation, flanges connection, body material or sealing, nearly every requirement can be met.

The 24.5 is ideal for the pumping and venting of vacuum systems. It resists high differential pressure and its modular design means it can be adjusted to various process and operation requirements. The 24.5 is designed for outstanding reliability and a long lifetime.

Manual
Pneumatic

Closed
Open

Based on a reliable and robust core design the 24.5 FV Inline Valve offers a high verity of design options for actuation from manual to pneumatic. In sizes from DN 10 to DN 800 mm (0.4" – 32") the 24.5 can be selected in aluminum or stainless steel in various specifications. The “all aluminum” solution provides advantages in selected applications with corrosive gases.

The standard options for flange connectors are ISO-KF and ISO-K. A visual position indication comes as standard although an electrical indicator can be added as an option. The valve can be controlled by a solenoid valve either “on board” or in a distant location if required. The 24.5 can be used in different temperature regimes depending on the sealing elastomer chosen. The valve can be supplied as normally opened, normally closed or double acting. In addition to these standard options further customization is possible.


Key features of the 24.5 Inline Valve

Features:

  • Large number of design options
  • Resistance against high differential pressure
  • Long maintenance free cycle

Benefits:

  • Outstanding reliability especially in large DN
  • Adjustable to various requirements
  • Low cost of ownership
Technical data
Sizes   DN 10 (⅜"), DN 16 (⅝"), DN 25 (1"),
DN 40 (1½"), DN 50 (2"), DN 63 (2 ½") on request,
DN 80 (3") on request
Actuators Manual With Removable Handwheel
  Pneumatic Single acting with Closing Spring (NC) or
Single acting with Opening Spring (NO) or
Double acting
Body Material   Aluminum or Stainless Steel
Feedthrough   Shaft Feedthrough
Standard Flanges   ISO-KF, ISO-K
Leak Rate Valve Body, Valve Seat < 1 × 10-9 mbar ls-1
Pressure Range   1 × 10-7 mbar to 5 bar (abs)
Differential Pressure on the Plate

In Opening Direction
In Closing Direction

≤ 2.0 bar
≤ 5.0 bar
Differential Pressure on the Plate   ≤ 1 bar
Cycles until first Service Manual Actuator
Pneumatic Actuator
10 000
3 million (NC, NO)
Temperature

Valve Body
Actuator
Solenoid Valve & Position Indicator

≤ 150 °C
≤ 120 °C
≤ 80 °C
Material Aluminium


Stainless Steel 
Plate
 
EN AW-6060 (3.3206), EN AW-6061 (3.3211),
EN AW-6063 (3.3206), EN AW-6082 (3.2315)

AISI 316L (1.4404)
AISI 316L (1.4404, 1.4435)
Seal Bonnet, Plate  
Mounting Position   Any
Solenoid Valve   24 VDC, 2.5 W (others on request)
Position Indicator: Contact Rating

Voltage

Current
 

5 – 50 VAC / DC
5 – 100 mA
Valve Position Indication   Visual (Mechanical)

 

Scroll to:
Scroll to:
Specify standard product

Get to the product details to specify your requirements to get a quote or to get a specific CAD data download.

Customized Solution

Specify your customized solution.

If you have your specification already at hand, please upload it and submit it to us. We are happy to send you a quote.

Selected Applications

Explore all applications