Mass Spectrometry & Gas Analysis
The control of the vacuum as well as the control of gas flows is a core element of mass spectrometry and gas analysis. Precise shut-off and control, o...
Read moreThe 08.2 Insertable Gate Valve series is designed to be installed directly between two connecting pipes without flanges. The advantage: It requires very little space.
The gate valve uses VAT's patented VATLOCK technology. It ensures a reliable gate sealing without any friction. In addition, the VATLOCK technology mechanically locks the gate in the closed position on both sides of the valve. This allows flexible and reliable use of the 08.2 Insertable Gate Valve in a wide variety of application situations and, in the case of pneumatic actuation, offers additional safety in the event of a compressed air supply failure.
In its modular design and its various design options, the 08.2 Insertable Gate Valve can be adapted to almost any application.
Already installed in thousands of demanding applications, the 08.2 Insertable Gate Valve has proven its outstanding reliability under a wide range of process conditions.
The 08.2 Insertable Gate Valve is available as manual or pneumatic version, with solenoid valve either as on board solution or for external mounting. Standard voltage of solenoid valve is 24 VDC, but other voltages are available on request. The 08.2 uses a toggle lever in the manual version and is available in DN 50.
The gate position is indicated visually (mechanically) directly on the valve by means of a position indicator and is also output as an electrical signal. Standard sealing material is FKM, other materials are available on request.
Features:
Benefits:
Sizes | DN 50 (2") | ||
---|---|---|---|
Actuator | Pneumatic | Double acting | |
Manual | With Toggle Lever | ||
Body Material | Aluminum | ||
Feedthrough | Shaft | ||
Installation | DIN centering ring | ||
Leak Rate | Valve Body | < 1 × 10-9 mbar ls-1 | |
Valve Seat | < 1 × 10-9 mbar ls-1 | ||
Pressure Range | 1 × 10-7 mbar to 1.6 bar (abs) | ||
Differential Pressure | On the Gate | ≤ 1.0 bar | |
At Opening | ≤ 30 mbar | ||
Cycles until first Service | 50 000 | ||
Temperature | Valve Body | ≤ 120 °C | |
Actuator | ≤ 80 °C | ||
Solenoid Valve | ≤ 50 °C | ||
Position Indicator | ≤ 80 °C | ||
Heating and Cooling Rate | ≤ 30 °C h-1 | ||
Material | Valve Body | EN AW-6082 (3.2315) | |
Mechanism | AISI 301 (1.4310) | ||
Seal | Bonnet, Gate | FKM (Viton®) | |
Mounting Position | Any | ||
Solenoid Valve | 24 VDC, 5.4 W (others on request) | ||
Position Indicator: Contact Rating | Voltage | ≤ 50 VAC/DC | |
Current | ≤ 0.1 A | ||
Valve Position Indication | Visual (Mechanical) |