Elektronische Support Dateien

GSD Dateien

Download der GSD Datei (Gerätestammdatei) für den SPS PROFIBUS Master

ESI Datei

Download von ESI Datei (EtherCAT Slave Information) für Ihren EtherCAT master

Ethernet Setup Instruktion

Download der Ethernet Setup Instruktion für VAT Ventile mit Digi Connect ME-C für Ethernet-Schnittstelle

EDS Files

Downloading EDS files, so as to be able to set DeviceNet parameters comfortably.

If it is an Integrated Controller follow the steps 1 to 7 given below:

  1. Refer to the first page of valve manual and check the software ID (e.g. 375487 (DeviceNet®)
  2. Purchase the VAT software 'Control Performance Analyzer' and download from: http://www.vatvalve.com/customer-service/informations-and-downloads/electronic-support-files 
  3. Install the software onto your PC 
    1. the valve is connected to your PC's serial port with the service cable 
    2. the valves DeviceNet jack is connected to your DeviceNet host controller 
    3. the valve is connected to power 
  4. Ensure the following connections: 
  5. Turn all power supplies on and start the software. 
  6. Select your PCs serial interface port as requested by the software. 
  7. Click 'System', 'Interface Status' and check the stated software ID. 

You'll see "software ID:123456X", a 6 digit number. The number may be followed by a capital letter (X).
If your "software ID" is not of this format, please contact your local sales representative for further support.
Compare with the screen shot on the right side.

Select the EDS files according to the software ID from Downloads below for a convenient setting of DevideNet parameters.

© 2021 VAT Group AG | Schweiz